An operations manager at a packaging plant, a distribution center, a clinic group and a software company can share a job title and very little else on paper. These operations manager resume keywords start with the terms most postings share, then cover the metrics, systems and improvement methods that show a hiring manager which kind of operation you have run.

Getting ghosted on Operations Manager applications?

It usually comes down to missing keywords. Scan your resume against your target job description to find exactly what the ATS expects you to have.

Find my missing keywords
ATS Keywords Score card showing a 92 percent score and passing ATS screening

Keywords that appear in almost every operations posting

Whatever the company makes, sells or services, operations manager postings describe a similar core: running the daily work, keeping cost and quality on target, leading the people who do the work, and improving how it gets done. These terms come up again and again:

  • Operations management
  • Daily operations and workflow management
  • KPIs and performance metrics
  • Budgeting and cost control
  • P&L responsibility
  • Forecasting and capacity planning
  • Labor planning and scheduling
  • Process improvement
  • Continuous improvement
  • Standard operating procedures (SOPs)
  • Root cause analysis
  • Quality control
  • Health and safety compliance
  • Vendor and supplier management
  • Inventory control
  • Supervisor development and coaching
  • Performance management
  • Hiring, onboarding and training
  • Cross-functional collaboration
  • Reporting and dashboards
  • Change management
  • Multi-site operations

Treat this as a base layer. Terms like “process improvement” and “KPIs” appear on a very large number of resumes, so on their own they tell a reader little about you. Pasting the full list into a skills section is one of the common resume keyword mistakes, because it hides the work you know best. The rest of this guide covers the terms that show where you did that work and at what scale. If you already have a posting open, the Resume Keyword Scanner shows which of its terms your resume already uses.

Work out which operations job the posting describes

Early in my recruiting work, I took on an operations manager search for a commercial laundry that cleaned linens for hospitals. The plant manager gave me one phrase to look for: pounds per operator hour. None of the first 40 resumes used it. That included two from people who had already run laundries. When I called them, both knew their figure without checking.

“Operations Manager” covers very different jobs, and each one has its own vocabulary. The first few duties in a posting usually tell you which job it is. Look for three clues:

  1. What it measures. OEE and scrap rate point to manufacturing. Units per hour and order accuracy point to a warehouse. Average handle time points to a contact center.
  2. Who the role reports to. A plant manager, a regional director, a practice administrator and a COO each expect different experience.
  3. Which systems it names. SAP or Epicor, a warehouse management system, ServiceTitan, or Salesforce and Jira each suggest a different setting.

Your answer decides which of your experience goes first and which words you use for it. Our guide to finding keywords in a job description explains how to pull these clues out of a posting, and the guide on matching your resume to a job description covers how to reorder your experience once you know.

Some operations roles have their own guides. For warehouse and distribution center roles, see logistics and supply chain resume keywords. Clinic and hospital operations overlap with healthcare administration resume keywords. If the job is mainly about delivering time-bound projects, project manager resume keywords will be the closer match.

Your KPIs are keywords too

Operations managers are judged by numbers, and the names of those numbers are some of the most useful operations manager resume keywords you can include. A plant hiring manager who reads “OEE” and “first pass yield” can see that you have worked inside a production system. A line like “improved operational efficiency” leaves them to guess.

When I coach operations managers, I ask them to describe the first report they open on Monday morning. The column headers on that report are often the best keywords missing from their resume. Several of the managers I have worked with tracked OTIF and labor cost per unit every week and still wrote “drove efficiency” on their resume.

Each type of operation has its own metric vocabulary. These are the terms that tend to show up in postings:

Type of operationMetrics that often appear in postings
Manufacturing and productionOEE (overall equipment effectiveness), throughput, yield, first pass yield, scrap rate, downtime, changeover time, OTIF (on time in full), cost per unit
Warehouse and distributionUnits per hour (UPH), order accuracy, dock-to-stock time, on-time shipping, inventory accuracy, cost per order
Contact center and customer operationsAverage handle time (AHT), first contact resolution (FCR), service level, SLA compliance, CSAT, abandonment rate
Field serviceFirst-time fix rate, response time, technician utilization, jobs per technician per day, callbacks
Clinics and medical practicesPatient wait time, no-show rate, provider utilization, patient volume, days in A/R
Retail and multi-unitLabor as a percentage of sales, shrink, comparable sales, audit scores, staff turnover
Business operationsOKRs, process cycle time, forecast accuracy, customer onboarding time, SLA attainment, cost per transaction

Spell out an acronym the first time you use it, for example “overall equipment effectiveness (OEE),” so the line matches a search for either version. Postings also name the same metric in different ways: one asks for “on-time delivery,” another for “OTIF.” The Resume Keyword Scanner shows which metric names from a posting are missing from your resume, so you can check whether you already track the same thing under another name.

One bullet, three versions

A KPI on its own is still thin. It becomes evidence when you add where it started, where it ended, how long it took and what you did. Here is the same bullet at three stages:

Improved production efficiency.
Improved OEE on the bottling lines.
Raised OEE on two bottling lines from 61% to 72% in nine months by cutting changeover time with SMED and starting a daily downtime review with shift supervisors.

The third version names the metric, the starting point, the result, the time frame and two methods. Each of those can match a term in a plant posting. If you do not know an exact figure, an honest estimate (“about 10 points”) is safer than a precise number you cannot explain in an interview. If many of your bullets still describe duties instead of results, the AI Resume Optimizer can draft new versions based on a target posting. Check every number in the draft against your own records.

Systems: name the one you ran the operation on

Postings often name a system because a new operations manager will be working in it from the first week. Write the product name and the type of system, such as “SAP S/4HANA (ERP)” or “Fiix (CMMS),” so the line matches a search for either.

  • ERP: SAP, Oracle NetSuite, Microsoft Dynamics 365, Epicor, Infor, Sage
  • Production and maintenance: MES, CMMS tools such as Fiix, UpKeep or IBM Maximo
  • Warehouse and transport: WMS and TMS platforms such as Manhattan Associates or Blue Yonder
  • Workforce management: UKG (formerly Kronos), ADP, Deputy
  • Field service: ServiceTitan, Salesforce Field Service, Jobber
  • Customer operations: Zendesk, Salesforce Service Cloud, Genesys
  • Reporting: Excel, Power BI, Tableau, Looker, SQL
  • Workflow and projects: Smartsheet, Asana, Jira, Monday.com

If a posting names a system you have not used, list the closest one you know. A mid-market manufacturer that runs on Epicor will often consider someone who knows another ERP well, and naming that ERP gives the reader something to compare.

System changes are worth their own bullet. If you helped move a site onto a new ERP or WMS, you kept the operation running while its tools changed, and “ERP implementation” appears in many senior operations postings. Say what moved, how many people or sites were involved, and how long it took for output or shipping volume to recover after go-live.

Improvement methods, at the level you used them

“Continuous improvement” is in almost every operations posting, but the phrase is vague by itself. Manufacturing and distribution postings usually name specific tools:

  • Lean manufacturing
  • Six Sigma and DMAIC
  • Kaizen events
  • 5S
  • Value stream mapping
  • Standard work
  • Gemba walks
  • Tiered daily meetings
  • PDCA
  • 5 Whys and fishbone diagrams
  • 8D problem solving
  • FMEA
  • TPM (total productive maintenance)
  • SMED (quick changeover)

Choose the tools you have actually used and connect each one to a result. “Led six kaizen events” tells a reader what you did. Adding what one event changed, such as “cut packaging line changeover from 50 to 22 minutes,” shows that it worked.

Write certifications exactly as you hold them. A Certified Six Sigma Green Belt from ASQ, a Green Belt from a company training program and a completed online course are three different things, and interviewers for plant roles often ask which one you have. Name the issuing body. If you took training but did not complete a certified project, “trained in Lean Six Sigma” is accurate.

Business operations roles at software and service companies describe improvement work with different terms:

  • Process mapping and documentation
  • Workflow automation
  • System ownership (CRM, ERP, billing)
  • Operating cadence and monthly business reviews
  • Cross-functional process design
  • Data quality and reporting

If your improvements happened in Salesforce, a ticketing tool or a shared spreadsheet model, name the tool and the process it changed.

Safety, quality and compliance: name the standard

For a third-shift operations manager opening at a commercial bakery, the client’s first screen was SQF, the food safety certification the plant held. Of roughly 60 applicants, 7 had it anywhere on their resume. At least two others had worked in SQF-certified plants for years and wrote only “ensured food safety compliance.”

If you worked under a standard, name it, even if someone else led the audit. Then describe your part: maintained it day to day, prepared for audits, led the audit, or closed corrective actions afterwards. Depending on the operation, these terms often appear in postings:

  • OSHA compliance and OSHA 30
  • TRIR and DART rates
  • EHS (environment, health and safety)
  • SQDC (safety, quality, delivery, cost) metrics
  • ISO 9001, ISO 14001 and ISO 45001
  • GMP (good manufacturing practices)
  • SQF, BRCGS and FSMA (food)
  • HACCP
  • DOT and FMCSA compliance (fleets)
  • HIPAA (healthcare operations)
  • SOX controls (finance and business operations)
  • CAPA (corrective and preventive action)

Safety numbers count as results. Plant postings often list their KPIs in SQDC order, with safety first, so “Reduced TRIR from 4.1 to 1.8 over two years” belongs near the top of a plant resume. In the UK, safety qualifications such as IOSH and NEBOSH appear in many operations postings.

Scope: people, shifts, sites and budget

Two operations managers can share every keyword above and still work at very different levels. Postings describe that difference with scope words:

  • Direct reports and total headcount
  • Supervisors or managers reporting to you
  • Number of shifts, including 24/7 operations
  • Number of sites or locations
  • Square footage, production capacity or daily volume
  • Operating budget
  • P&L ownership
  • Capital projects (capex)
  • Union environment and collective bargaining agreements (CBA)

Put scope inside your bullets, where a reader sees it next to the work:

Led a 24/7 operation of 140 hourly employees and 6 supervisors across three shifts in a union environment, with a $9M operating budget.

Union experience is easy to leave out and often requested. Many manufacturing and distribution postings ask for experience leading in a union environment, and some list it as a requirement. If you have managed under a collective bargaining agreement, handled grievances or worked with union stewards on schedule changes, say so in plain words.

Be exact with budget words, too. “Owned a $14M operating budget” and “contributed to the site budget” describe different jobs, and interviewers for director of operations roles ask which one you had.

When “operations manager” meant doing everything

One candidate I placed had the title Operations Manager at a 12-person HVAC company. In practice she ran payroll, dispatched technicians, renewed the fleet insurance, chased unpaid invoices and ordered the copier toner. Her first resume described all of it in one long paragraph inside a two-column template. The version that got her interviews used one column, split the same work into three groups and changed which group came first for each application.

At small companies, the title often covers office management, HR administration, purchasing, dispatch and some bookkeeping. That range is real experience, but a reader looking for one kind of operation can miss the part that fits. Group the work by theme:

  • Service operations: dispatch, scheduling, technician utilization, callbacks
  • Finance and administration: payroll, accounts receivable, vendor payments, insurance renewals
  • People: hiring, onboarding, safety training

Then let the posting decide which theme leads. For a field service operations role, dispatch and technician metrics go first. For an office or business operations role, systems and finance processes go first. Keep your real job title. You can add the posting’s wording to your headline, such as “Operations Manager | Field Service,” when it describes the work you are targeting.

Check the layout as well. Some applicant tracking systems read two-column templates out of order, which can separate a keyword from the job it belongs to. The ATS Resume Checker shows how the text in your file comes through.

Two summaries built from different keyword sets

Your resume summary is the first place a reader looks for the kind of operation, the scale and the metrics. Here are two versions for different settings:

Manufacturing

Operations manager with 9 years in food manufacturing, including 4 years running a 24/7 SQF-certified bakery with 180 employees in a union environment. Responsible for a $22M operating budget, OEE and OTIF performance, and a Lean program built on tiered daily meetings and kaizen events. Certified Six Sigma Green Belt (ASQ); daily user of SAP and Fiix.

Business operations

Business operations manager with 6 years at B2B software companies, leading process design and systems work across sales, support and finance. Owned the customer onboarding process in Salesforce and Jira, cutting average onboarding time from 31 to 18 days, and ran the monthly operating review for the COO. Works in SQL, Looker and workflow automation tools.

The two summaries share very few keywords. Each one suits its own posting because it names the setting, the scale, two or three metrics, the methods and the systems within a few lines. Write yours in the same order, then paste the posting and your draft into the Resume Keyword Scanner to see which of its terms are still missing from the top of the page. For other job titles, our overview of resume keywords by industry links to every role guide.

Which ops keywords is your resume missing?

Paste an operations manager posting and your resume into our free Resume Keyword Scanner to see which KPIs, systems and methods are still missing.

Scan your resume for free